Benchtop Controller and Vessels

System Specification
Controller
Duo heating system controller
Built-in rotameter
4 built-in pump heads
Vessel
Double Jacketed Dish Bottom Vessel (includes glass body, head plate, T-handling bar, 2 probe adaptors)
Single Wall Dish Bottom Vessel (includes glass body, head plate, T-handling bar, 2 probe adaptors)
Air Lifter Vessel (includes glass body, head plate, draft tube, T-handling bar, 2 probe adaptors)
Single Wall Dish Bottom Vessel with Heating Blanket (includes glass body, head plate, T-handling bar, 2 probe adaptors and heating blanket)
Single Wall Plain Bottom Vessel with Heating Base Unit (includes glass body, head plate, T-handling bar, 2 probe adaptors and heating base unit)
Solid State(FS-V-SA05P)
Rushton-type impellers
No impellers
Rushton-type impellers
Multi-Type
Baffle assembled
Draft tube assembled
Baffle assembled
N / A
Condenser assembled
Air sparger assembled
Micro sparger assembled
Air sparger assembled
Agitation motor
Brushless motor
N / A
Brushless motor
Brushless motor
Probes
1x pH probe and 1x probe cable
Optional
1x DO probe and 1x probe cable
Optional
1x Temperature probe and 1x probe cable
1x anti-foam/level sensor and 1x probe cable
N / A
Start-up kit
Complete start-up kit includes silicone tubes, tube clamps, metal connector and autoclavable disc filters.
Vessel Specification
Vessel
Double Jacketed (FS-V-A series)
Single Wall (FS-V-B series)
Air Lifter (FS-V-C series)
Working volume
500ml
1L
3L
5L
10L
1L
3L
5L
10L
5L
Total volume
1L
1.5L
3.8L
6.8L
12.5L
1.5L
3.8L
6.8L
12.5L
7L
Vessel
Single Wall with Heating Blanket (FS-V-B series)
Single Wall with Heating Base Unit (FS-V-D series)
Solid State(FS-V-SA05P)
Working volume
1L
3L
5L
10L
15L
20L
3L
5L
10L
5L
Total volume
1.5L
3.8L
6.8L
12.5L
18.7L
23.7L
3.7L
6.7L
13.1L
6.8L
*All vessels are made of borosilicate glass and 316L stainless steel for headplate and all fittings.

Utility Requirement
Power source
100-120V / 210-230V, 50-60Hz with electrical safety cutoff switch
Water source
0.4-1 bar (5.8-14.5 psi); water supplied to fermentors should be at least 15°C below the set operating temperature
Air source
0.5-2 bar, must be dry, oil-free and filtered
Sterilization
Autoclave; size of the autoclave's inner chamber must be able to accomodate vessel with condenser attached
Control unit
Control panel
10.4” color touch-screen Interface (Resolution: 800 x 600 pixels)
Communication port
Remote software control through Ethernet, up to 16 systems per PC
Data export through USB port
Analog AUX port for system extension
Program storage
Up to 59,994 programs for different kinds of condition
Log data storage
Up to 100 process monitoring data files
Cabinet material
ABS front panel and painted iron housing
Dimension
Footprint: W x L = 15.75" x 23.62" (400 mm x 600 mm); Height: 29.14" (740 mm)
Rated voltage
110V~/220V~; 50/60 Hz, 10A
Weight
Approx. 88.18 lb (40 kg)
Aeration
Inlet gas flow-meter
0, 0.4-5 LPM (0.5, 1 L); 0, 1-10 LPM (3, 5 L);
0, 2-20 LPM (10 L); 0, 4-50 LPM (15, 20 L)
Sparger
L-shape (500ml, 1L); Ring sparger (3L and above);
Micro-sparger (C type vessels);Center-located sparger (solid state)
Baffle
316L stainless steel baffles
0.5-3L vessel: fixed, unmovable
5L and above vessel: removable
Temperature
Heating
1. Thermostat system: built-in heat exchanger (550W heater, water circulation pump)
2. Dry heating system (heating blanket or heating base unit)
Cooling
Built-in water module and external water circulator (optional)
Range
- FS-V-A/ B / SA05P series: 5℃ (41℉) above coolant up to 60℃ (140℉)
- FS-V-C series (Double Jacketed): 5℃ (41℉) above coolant up to 60℃ (140℉)
- FS-V-C series (Single Wall): without temp control
- FS-V-D series : 5℃ (41℉) above coolant up to 90℃ (194℉)
Probe
Platinum RTD probe (PT-100), non autoclavable
Control mode
Manual or programmable 15-step PID control
Agitation
Drive
Removable top brushless motor
(M3 for 0.5 L, 1 L; M2 for 3~20 L; M4 for solid state)
Speed range
a. For Pitched blade impeller: 30-300 rpm
b. For Rushton impeller: 30-1800 rpm(0.5, 1L); 30-1200 rpm(3, 5L); 30-1000 rpm(10L);30-700 rpm (15, 20L)
c. For Broken type/Spiral type/Anchor type impellers (only for FS-V-SA05 vessel): 1 – 60 rpm**
Resolution
1 rpm increment
Impeller
2 impellers for 0.5 L &1 L vessel and 0.5-5 L Double Jacketed Vessel
3 impellers for 3 L vessel and above; for 10 L Double Jacketed Vessel
Note: customized impellers are available upon ordering
Control mode
Manual or programmable 15-step PID control
pH
Range
0 -14 (2-12 for maximum precision)
Resolution
0.01 pH
Probe
Gel-filled electrode, autoclavable
Control mode
Manual/programmable 15-step PID control with adjustable deadband;
pH Stat with smart feeding technology
DO
Range
0-200%, Control range: 0-100%, adjustable
Resolution
0.1%
Probe
Polarographic DO sensor; autoclavable
Control mode
2-stage DO cascade response
a. Increase or decrease agitation speed
b. Supply external oxygen source (oxygen enrichment module required, optional device)
c. Adjust DO level using gas mixing control (gas mixing station module required, optional device)
Substrate feeding strategy; DO Stat with smart feeding technology
ORP (optional)
Measurement range
± 2000 mV
Resolution
1 mV
Probe
Gel-filled electrode: autoclavable
Foam / level
Probe
316L stainless steel protector with insulated PTFE tube; autoclavable, adjustable sensitivity control
Control mode
Foam: on/off switch
Level: on/off switch control with wet/dry probe set up
Peristaltic pump
Pump number
4 built-in Watson Marlow pumps;
2 external pumps expandable:
• 1 external pump: MU-D series required (optional)
• 1 external pump: 4-20mA or DC 0-10V analog input
Motor type
Precise stepping motor; minimum speed is 1 rpm
Speed range
0, 1 - 65 rpm
Resolution
1 rpm
Control mode
Manual or programmable 15-step feeding control; pump can be assigned for acid, base,antifoam and and/or substrate; pump can calculate flow rate and total volume
Exhaust
Device type
316L stainless steel condenser


Aksesoris Laboratorium